Kit Z80-MBC2 Limited Edition Gold
Cpu Z80 4/8MHz (SW selectable), 128KB banked RAM, 16 GPIO, I2C, RS232-TTL, HD emulation on SD, RTC with temperature sensor, Multi-boot management for max. 10 OS (currently supported OS with 16 HD each: CP/M 2.2, Q/PM 2.71, CP/M 3, UCSD Pascal, Collapse OS, Fuzix OS), Autoboot (direct binary load and execution from SD), iLOAD (automatic load and run executables files in Intel-Hex format), SW controlled User led and key, stand-alone Basic and Forth interpreters (with IOS-LITE embedded into FW), boot mode and system parameters user menu.
Security policies
Shipping Policies
Returns Policies
This project is released (hardware and software) under the GPL 3 license and was designed by Fabio Defabis (Just4Fun), more information is available at this link.
Attention, VAT and shipping costs change depending on the country of the customer.
Example calculation cost of the kit all inclusive
Country | Kit | VAT | Shipping | Total |
Italy | 98.90€ | 21.76€ | 8.35€ | 129.01€ |
EU Area | 98.90€ | 21.76€ | 12.70€ | 133.36€ |
United States | 98.90€ | 0.00€ | 16.50€ | 115.40€ |
Australia | 98.90€ | 0.00€ | 17.95€ | 116.85€ |
The product is shipped from Italy to worldwide, with tracking code.
No customs fees, the customer will not pay customs fees, shipping by legal procedure.
Delivery time:
Italy: 1 working day, Sardinia and Sicily 2 working days
France: 4 working days
United Kingdom: 4 working days
Kit contents:
n. 1 Resistor 39 ohm 1/4W 1%
n. 1 Resistor 330 ohm 1/4W 5%
n. 2 Resistors 390 ohm 1/4W 1%
n. 2 Resistors 680 ohm 1/4W 1%
n. 3 Resistors 1 Kohm 1/4W 1%
n. 1 Resistor 1,2 Kohm 1/4W 1%
n. 2 Resistors 4,7 Kohm 1/4W 1%
n. 8 Resistors 10 Kohm 1/4W 1%
n. 2 Resistors SIP9 1x8 10 Kohm 1/8W 2%
n. 2 MLCC Capacitors 22 pF
n. 8 MLCC Capacitors 100 nF
n. 2 Solid Polymer Electrolytic Capacitors 100 uF 16V.
n. 2 Diode 1N4148
n. 3 Diode 1N5817
n. 2 Led 3 mm. red
n. 2 Led 3 mm. yellow
n. 1 Led 3 mm. green
n. 1 Led 3 mm. blue
n. 2 Transistors 2N2907
n. 1 Quarz 16 MHz
n. 1 74HC00
n. 1 Z84C0008PEG
n. 1 ATMEGA32A already programmed and ready to use
n. 1 AS6C1008-55PCN
n. 1 MCP23017
n. 1 Socket DIP-14 Through Hole, Solder and Contact Gold
n. 1 Socket DIP-28 Through Hole, Solder and Contact Gold
n. 1 Socket DIP-32 Through Hole, Solder and Contact Gold
n. 2 Sockets DIP-40 Through Hole, Solder and Contact Gold
n. 1 Connector 1x4 male Solder Tin, Contact Gold
n. 1 Connectors 1x8 male Solder Tin, Contact Gold
n. 1 Connector 2x10 male Solder Tin, Contact Gold
n. 2 Connectors 1x6 female Solder and Contact Gold
n. 1 Connectors 2x3 IDC male Solder and Contact Gold
n. 1 Connectors 1x2 JST male
n. 1 Connector 1x2 JST female
n. 2 Pins plugin JST
n. 2 Microswitch 6x6x5 mm. Red and Blue
n. 6 Led spacer
n. 1 Quarz spacer
n. 4 Hexagonal spacer M3 5.5 x 10mm. nylon black
n. 4 Screws 3MA x 6 mm. nylon black
n. 1 Module RTC modified Pin Gold
n. 1 Module microSD card Pin Gold
n. 1 Adapter USB RS232-TTL CP2102 modified Pin Gold
n. 1 Cable 30Cm. for Adapter USB RS232-TTL
n. 1 microSD 4GB Class 10 with all programs
n. 1 Battery CR2032
n. 1 PCB Black ENIG Gold
Data sheet
- Processor
- Zilog Z80
- RAM Memory
- 128 KB
- Kit
- Assembled
To assemble
Works really well
Well packed and fun to build, worked first time love this.
You might also like